Setup the Scanner
At this point the docking station and your scanner should be unboxed. The scope of delivery should be the scanner, the charging station, the power supply, the smartphone attachments and 4 socket adapters.
-
Choose the adapter that suits your country and slide it into the power supply.
-
Then connect the power supply to the docking station and plug it into the socket.
-
The scanner should arrive ready to use but you should charge it before use.
-
You can let it slide in between the two arms of the docking station, and it will be charged automatically.
-
While the scanner is charging, you can prepare the smartphone with the magnetic clips or screws. To do this, place the magnetic clips in the square recesses and remove the protective film of the adhesive surface. At best, you have a protective case for your smartphone and can now press it on the charging area. Make sure that the inductive charging function is optimally used.
-
Alternatively, you can mount the protective case by using the screws.
Now everything should be prepared for working with SKPident. The next chapters are guidance. If you have found any questions and suggestions, an error, or inconsistencies, please inform us. skpident@skp-gmbh.com